Ig Doors Logo
IG Doors - +44 (0)1633 486860 - Return to the Site Home Page

  HOME  

  IG PRODUCTS  

  MAINTENANCE  

   COSHH  

  CONTACT IG DOORS  

   

IG Secured By Design Doors

 

Fully compliant with PAS 23-PAS 24

 
   
 

CRIME REDUCTION AND RESPONSIBILITY
Secured By Design is the UK police flagship initiative supporting the principles of designing out crime. Supported and managed by the Association of Chief Police Officers, the initiative has already achieved significant successes as demonstrated by research by Huddersfield University. This shows that residents living in SBD developments experience between 54% and 67% less crime.

All local authorities have a responsibility under Section 17 of the Crime & Disorder Act 1998 to take account of community safety and crime reduction in all aspect of their duties.

SECURED BY DESIGN LICENSED PRODUCTS
Essential to the Secured By Design scheme are Licensed Products which are successfully tested to meet the relevant Police Preferred Specifications. The Specifications for doors are PAS 23-1: 1999, which is a performance standard that certifies that a door set is fit for purpose; and PAS 24-1: 1999 which covers enhanced security performance requirements for door assemblies. This is an attack test standard that certifies that a door, frame lock and hardware set has withstood a series of physical tests based on common methods of burglary using defined sets of tools and attack time.

THE IG RANGE
IG offer a range of Original, Steel Woodgrain and Glass Reinforced Polymer doors that have been successfully tested to be fully compliant with PAS 23 and PAS 24 and have Police Preferred Specification licences.

Multi-point locks are fitted to meet the Police Preferred Specification, and locks and hinges are protected by additional reinforcement. Lock options include a choice of key operation internally and externally, or thumbturn internally and key externally dependent on glazing style and door type

Multi-point locks can be supplied to incorporate night latching with split spindles (the main entrance must have split spindles for night latching – secondary doors have solid spindles). Please specify which is the main entrance when ordering.

Hardwood frames, either four-sided or goal post depending on customer’s requirements, are standard.

 

The doors tested are for both open in and open out applications.
Frames are available with sidelights.
Frames are available with fanlights.

Fire rated doors are available tested to meet Secured by Design. See Internal Half-Hour Fire Doors for range available.

For a fully detailed specification please contact our technical office.

Original and Steel Woodgrain
Door and Timber Frame Sizes

Overall Frame Size

Type of Unit

Door
Width

Clear
Opening

844mm x 2095mm

Single

Single

757mm

884mm x 2095mm

797mm

920mm x 2095mm

833mm

 

932mm x 2097mm

* 845mm

775mm

1001mm x 2097mm

* 914mm

850mm

Original and Steel Woodgrain
Door and Sidelight Sizes

1226mm x 2095mm

Single

Single with Sidelight

757mm

1266mm x 2095mm

797mm

1302mm x 2095mm

833mm

 

1314mm x 2097mm

* 845mm

775mm

1383mm x 2097mm

* 914mm

850mm

Both direct glazed and sidelights can be used for frame
dimensions up to 1500mm wide.

Glass Reinforced Polymer
Door and Timber Frame Sizes

849mm x 2095mm

Single

Single

762mm

900mm x 2095mm

813mm

925mm x 2095mm

838mm

 

932mm x 2097mm

* 845mm

775mm

1001mm x 2097mm

* 908mm

850mm

Glass Reinforced Polymer
Door and Sidelight Sizes

1231mm x 2095mm

Single

Single with Sidelight

762mm

1282mm x 2095mm

813mm

1307mm x 2095mm

838mm

 

1314mm x 2097mm

845mm

1383mm x 2097mm

908mm

Note

To meet Secured By Design specification, single frames can either be PVCu or hardwood, combination frames must be hardwood.
Please contact Technical Office for special requirements.
*Part M compliant.
Structural opening to be 6-10mm greater than frame size.
 
     
         
     
 

IG SECURED BY DESIGN DOOR STYLES

 
         
 
XD01 / XSWG01 / XFG01 XD02 / XSWG02 / XFG02 XD03 XD04 / XSWG04 / XFG04 XD05 / XSWG05 / XFG05 XD06 / XSWG06 / XFG06 XD07

XD01
   XSWG1
    XFG1

XD02
  XSWG2
    XFG2

XD03

XD04
  XSWG4
    XFG4

XD05
  XSWG5
     XFG5

XD06
  XSWG6
     XFG8

XD07

XD08 XD09 XD11 XD12 XD15 XD16 XD18

XD08

XD09*

XD11*

XD12*

XD15

XD16*

XD18*

XD19 XD22 XD27 XD28 XD30 / XSWG30 / XFG30 XD32 / XSWG32 / XFG32 XD33 / XSWG33 / XFG33

XD19

XD22
XFG22

XD27

XD28

XD30
  XSWG30
    XFG30

XD32
  XSWG32
    XFG32

XD33
  XSWG33
    XFG33

XD40 XD41 XD42 XD46 XD47    

XD40**

XD41**

XD42** XD46* XD47*

             

Steel Door PVC Frame Sizes

Overall Frame Size

Type of Unit

Door
Width

846mm x 2071mm

Single

757mm

886mm x 2071mm

797mm

922mm x 2071mm

833mm

934mm x 2098mm

845mm

1003mm x 2098mm

914mm

Glass Reinforced Polymer Door PVC Frame

851mm x 2071mm

Single

762mm

902mm x 2071mm

813mm

927mm x 2098mm

838mm

934mm x 2098mm

845mm

997mm x 2098mm

908mm

Note

To meet Secured By Design specification, single frames can either be PVCu or hardwood, combination frames must be hardwood.
Please contact Technical Office for special requirements.
*Part M compliant.
Structural opening to be 6-10mm greater than frame size.

Standard Widths

1200mm

1350mm

1500mm

Single door with single direct glazed sidelight.
Max. width 1500mm


Maximum height of Fanlight frame is 2500mm

Standard Widths

844mm

884mm

920mm

932mm

1001mm

Single direct glazed fanlight door frame

 

Note:
Fanlight and sidelight frames are only available in hardwood

IG Original Steel

Steel Woodgrain

IG Glass Reinforced


* Not available in 914mm width.

** Available only in 845 and 914mm

       
           
 
         
 

 Click Here for Printer
Friendly Version of this page.

 
 
Ig Doors Logo - Return to top of page
IG Doors - +44 (0)1633 486860 - Return to the Site Home Page